lego friendship bracelets.

Processed with VSCOcam with c2 preset

The perfect craft for your lego-obsessed kiddo! Actually mine loves making bracelets too so this really was the perfect craft. We had everything laying around at home, even the correct drill bit!

Flat LEGO bricks
Drill and 3/32″ drill bit
Embroidery thread (three colors per brick)
Scissors
safety pin or needle

Using a drill and the 3/32″ drill bit, drill 2 holes in each LEGO brick; We found it was easier to do it from the back and through the round hole because when we did it through the front the lego broke.

Cut embroidery thread in a few different colors to one length.  Put all of the colors together and fold them in half. Thread the loop through one of the holes.Pull the loose strands through the loop you have formed once pulling part of the thread through the hole. I used the a safety pin and the top of a needle to help push the thread through the hole because the hole was kind of small. Pull the thread tight. I had milo hold the lego while I braided the thread. Tie knots at the end and you are done!

I found the original idea here. 

lego crayons.

legocrayons
Milo’s birthday was earlier this month – and we made some lego crayons to go into the lego goodie bags i created for the kiddos. As you can probably guess, Milo is REALLY into legos.

This is a super easy project that uses up all those cracked, broken, old crayons you might have laying around. They are fun to make solid colored, or use hues of the same color and make a multi colored crayon.

heres what you need

Silicone Mold (I bought mine these on amazon!)
exacto knife
crayons

Preheat your oven to 225 degrees.
Use an exacto knife and slice the wrapper off your crayons.  Break the crayons into small pieces. Fill the silicone molds as much as possible, Place mold on a cookie sheet to avoid spilling when you take them out, then bake for 15-20 minutes. Take these out of the oven very carefully, as they will be all liquid at this point. Let sit for about 5-10 minutes until starting to set, then put into the freezer for about 10 minutes. Once completely cooled, remove from the tray.
Be careful when

320. lego mario

A few weeks ago, one of our neighbors came by with his entire collection of legos for milo to keep! I’m not too well versed in legos – but I made this mario out of legos after seeing a photo of it here.