I had intended to make these last year, and never got around to it. I found a pack of 12 plastic gold balls at the dollar store last season and have been hanging onto them with the hopes to make one of these. These took a little bit of patience and care to create – but they are perfect for all harry potter fans in your life!
I got the idea here.
Heres what you need:
Gold Ornament Ball
Jewelry or floral wire
elmers type glue
First, draw an actual size sketch of how you want your snitch wings to look on a scrap piece of paper. Use this as a guide to shape thin craft wire into your wing shape. Close the shape by twisting the wire around the other one 3 or 4 times to make a tight coil. Snip the wire, but leave a little bit of the coil for later. Do this again for the other wing.
Coat wires with glue and lay a sheet of tissue paper over top of wires. Use a clean dry brush to push down on the paper, sticking it down to the wires all around each wing. Let dry, then cut out, leaving a few millimeters of paper as a border. Apply glue to border and roll over edges of wire all around the wing.
Coat wings on each side with glue and apply light gold glitter. Let dry.
Use a small dab of hot glue on the wire coils to make a surface for attaching to the ball. I used the longer tail here to help adhere the wing to the ornament. I held each of them vertically against a piece of parchment paper. Hold each one until the glue cools and a flat surface has formed on the bottom. I put a little more hot glue around it after it dried to secure it a little more and then later put elmers glue around along with some glitter to help hide the hot glue.